Memory allocation for online change in GX Developer

Select [Online] -> [Write to PLC] on the menu of GX Developer, open the [File selection] tab, and press "Param + Prog" button. Then open the [Program] ta... More Details >>

Battery life

It depends on the model of the CPU module, the amount of battery consumption, and the power-on time ratio.Example) For Q06HCPU with power-on time ratio of 50... More Details >>

Pulse width with which the QX42 recognizes all pulses

Maximum scan time (10 ms) + Response time (10 ms) = Pulse width with which the module recognizes all pulses (20 ms) More Details >>

Deleting GX Developer when installing GX Works2

GX Developer does not need deleting when GX Works2 is installed. More Details >>

Reading and writing bits/words using the FL-net (OPCN-2) interface module

The parameters and auto refresh settings for the FL-net (OPCN-2) interface module cannot be made using the Network Parameter items in GX Developer.Set those ... More Details >>

Ethernet communication after the replacement of an external device

Personal computers have different MAC addresses and an Ethernet module hold a MAC address. Hence the MAC address that the Ethernet module currently holds is ... More Details >>

COMMENT to disappear after a PLC type change

Copy the COMMENT into the MAIN of comments by program before changing the PLC type.The basic model QCPU cannot deal with common comments. More Details >>

Writing comments to the standard ROM in Q series

To write in the standard ROM, select [Online] -> [Write to PLC] (Flash ROM) More Details >>

Device comment

Those displayed under COMMENT are common comments, and others are program comments.When there are multiple programs in a project, a common comment applies to... More Details >>

What to do in the case of the error "A default router IP address needs to be set."

When having access bypassing a router, enter only the IP address.The subnet mask pattern is not required to be entered because GX Works2 or GX Developer auto... More Details >>