Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module

Open the cover at the bottom of the CPU module and install the battery.

An error occurs and CPU will stop. Install the END cover and reset the CPU module.

The maximum length between a hub and a node is 100 m. The max. length connectable to a hub is 200m.When repeater hubs ar

- Ambient temperature: 25+/-5 degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55 degrees Celsius

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- EN

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

- Ambient temperature: 25+/-5 degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55 degrees Celsius

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

1-10 of Total 105

prev 1 / 11page next

Compliance with SEMI-F47 for L series power supply module

Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module: L61PWith an input power of 100 VAC,... More Details >>
- No：22768
- Release Date：2018/09/03 17:30
Battery install position in LCPU

Open the cover at the bottom of the CPU module and install the battery. More Details >>
- No：22821
- Release Date：2018/09/03 17:30
END cover

An error occurs and CPU will stop. Install the END cover and reset the CPU module. More Details >>
- No：22817
- Release Date：2018/09/03 17:30
Cable length to connect to built-in Ethernet port in LCPU

The maximum length between a hub and a node is 100 m. The max. length connectable to a hub is 200m.When repeater hubs are used in cascade connection, the max... More Details >>
- No：22781
- Release Date：2018/09/03 17:30
L60AD4 accuracy

- Ambient temperature: 25+/-5degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55degrees Celsius with tolerance of +/-0.2% (Accuracy f... More Details >>
- No：22811
- Release Date：2018/09/03 17:30
- Update：2018/09/26 16:46
Removal of SD memory card during logging in L series

An error will occur in CPU. More Details >>
- No：22812
- Release Date：2018/09/03 17:30
Usage of UPS (uninterruptible power supply)

No, it cannot be used. More Details >>
- No：22831
- Release Date：2018/09/03 17:30
Use of END cover with the branch module and extension module

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- END cover with ERR terminal (optional i... More Details >>
- No：22815
- Release Date：2018/09/03 17:30
Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30
L60DA4 accuracy

- Ambient temperature: 25+/-5degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55degrees Celsius with tolerance of +/-0.3% (accuracy f... More Details >>
- No：22825
- Release Date：2018/09/03 17:30
- Update：2018/09/27 11:38

1-10 of Total 105

Inquiries

page top