The short-circuit withstand capacity of the semiconductor in US-N/K/Htype solid state contactor is specified and the flo

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magneti

In the withstand voltage test, 2500V is applied for 1 min. The appliedlocation is as follows.1. Between the conductive p

Since the leakage currents exist in a solid state contactor such as US-N/K/H type even when it is "OFF" state, it can no

Surge voltage occurs due to opening/closing a control coil. Since we donot provide the surge suppressor for a control co

The faults of main circuit element in a solid state contactor happenbecause:1. Excessive overcurrent that is over permis

The permissible variation range of frequency (short time variation) is ±5%.

US-N* type is controlled by DC power supply (12 to 24 VDC). However,UA-DR1/UA-SH1 driving-unit of option unit make it po

It is instantaneous capacity (Making VA) immediately after a control coil isenergized. In the case of DC operation, it i

It is necessary to change the wires connected by solder to the board of theDL circuit since the wire length is short. Th

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters > Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Motor Starters ]

21-30 of Total 142

prev 3 / 15page next

About Low-voltage Power Distribution Products

The short-circuit withstand capacity of the semiconductor in US-N/K/Htype solid state contactor is specified and the flowing current at short-circuit must no... More Details >>
- No：23280
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magnetic contactor increases if thecontact "... More Details >>
- No：23309
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

In the withstand voltage test, 2500V is applied for 1 min. The appliedlocation is as follows.1. Between the conductive part and the grounded metal part, and ... More Details >>
- No：23305
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

Since the leakage currents exist in a solid state contactor such as US-N/K/H type even when it is "OFF" state, it can not be used for insulatingload equipmen... More Details >>
- No：23288
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

Surge voltage occurs due to opening/closing a control coil. Since we donot provide the surge suppressor for a control coil which is available forthem, you ne... More Details >>
- No：23285
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

The faults of main circuit element in a solid state contactor happenbecause:1. Excessive overcurrent that is over permissible current flows due to loadcircui... More Details >>
- No：23258
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

The permissible variation range of frequency (short time variation) is ±5%. More Details >>
- No：23371
- Release Date：2018/09/12 15:12
About Low-voltage Power Distribution Products

US-N* type is controlled by DC power supply (12 to 24 VDC). However,UA-DR1/UA-SH1 driving-unit of option unit make it possible to control byAC power supply (... More Details >>
- No：23359
- Release Date：2018/09/12 15:12
About Low-voltage Power Distribution Products

It is instantaneous capacity (Making VA) immediately after a control coil isenergized. In the case of DC operation, it is less than constant input. More Details >>
- No：23334
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is necessary to change the wires connected by solder to the board of theDL circuit since the wire length is short. Therefore, it is not possible toconnect... More Details >>
- No：23299
- Release Date：2018/09/12 15:11

21-30 of Total 142

Inquiries

page top