The following points are different for the iQ-F series. ・Error History If the FX5 CPU Module is turned off, the error

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are th

You can't. Device allocation for refresh settings is sequential only.

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check c

1. Data backup using an optional battery Built-in RAM data and clock data of a programmable controller are held by usi

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at p

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)
Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

211-220 of Total 1082

prev 22 / 109page next

Regarding differences in specifications of the FTP server auto transfer function for data logging files

The following points are different for the iQ-F series. ・Error History 　If the FX5 CPU Module is turned off, the error history is cleared. ・Setting detail... More Details >>
- No：44335
- Release Date：2024/03/20 13:21
- Category： MELSEC iQ-F Series , CPU Module
Regarding automatic transfer of Data Logging Files

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CPU Module Ver. 1.300 or later ・FX5U... More Details >>
- No：44334
- Release Date：2024/03/20 13:30
- Category： MELSEC iQ-F Series , CPU Module
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding sending emails

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in the following versions. ・Hardware s... More Details >>
- No：40035
- Release Date：2023/08/24 15:40
- Update：2023/08/25 11:34
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding GX Works3 Module configuration diagram

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are those excluding FX5-CNV-IFC and FX3 Int... More Details >>
- No：39331
- Release Date：2023/02/14 09:08
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding CC-Link IE Field Network Basic Refresh Settings

You can't. Device allocation for refresh settings is sequential only. More Details >>
- No：39306
- Release Date：2023/02/13 16:41
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Types of data backup methods (FX3G series)

1. Data backup using an optional battery 　Built-in RAM data and clock data of a programmable controller are held by using an optional battery. 　The life of... More Details >>
- No：24701
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Duplication error in a CC-Link master station

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at power on. More Details >>
- No：23044
- Release Date：2018/09/03 17:31
- Category： Network related products

211-220 of Total 1082

Inquiries

page top