MX Component Version 4's compatibility with Visual Basic 6.0

MX Component Version 4 does not support Visual Basic 6.0. More Details >>

Access to a GOT

It is impossible to access the GOT via a universal model QCPU module. More Details >>

Setting for sequentially inputting device comments in GX Works2

Select [Tool]-> [Options]-> [Program Editor] -> [Ladder/SFC] -> [Enter ladder] from the menu, and set [Enter label comment and device comment]... More Details >>

Difference between AJ65SBTB1-16DT1 and AJ65SBTB1-16DT2

Major differences are shown below. - AJ65SBTB1-16DT1 - Rated input current approx. 5 mA - ON voltage/ON current 15 VDC or higher/3.0 mA or higher - O... More Details >>

Executing the QJ71C24N's pre-defined protocol support function

Executing the CPRTCL instruction (dedicated instruction) executes a specified protocol. More Details >>

How to check link errors in CC-Link slave stations

The data link status is stored in SW80 to SW83.Each bit corresponds to a station number and a bit turns ON if the corresponding station causes a data link er... More Details >>

CC-Link IE Controller cable standard

Use the cables that meet the IEC60793-2-10 Types A1a.1 optical fiber standard. The connectors are LC (duplex) connectors. Two cores are required.The core di... More Details >>

Communication between CPU modules established by QJ71E71

The communication between QJ71E71 series modules can be established if READ/WRITE instructions are used. More Details >>

Model name of the connector used for the FCN connector type CC-Link remote I/O module

FCN connectors (40-pin connector) are shown below.- A6CON1 (soldering connector)- A6CON2 (crimp connector)- A6CON3 (pressure-displacement connector)- A6CON4 ... More Details >>

Mixing line topologies with star topologies in the CC-Link IE Field Network　

Line topologies and star topologies can be mixed. More Details >>