Update timing of LD75 current feed value and machine feed value

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms More Details >>

LCPU internal clock synchronization

Use the time setting function to synchronize the internal clock. More Details >>

Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>

GX Developer support by LCPU

GX Developer Version 8.89T or later is supported.There are restrictions in some functions. For the details, refer to "Precautions on L Series Modules" in ... More Details >>

LCPU built-in I/O function

The built-in I/O functions are standard functions of the L series CPU. Combining these functions flexibly achieves various controls with lower cost, eliminat... More Details >>

Connected position of branch module and extension module

The position to connect the branch module and extension module is as follows. More Details >>

Sampling cycle of L60TCTT4(BW) and L60TCRT4(BW)

It is selectable from the following. - 500 ms/4 channels (Default)- 250 ms/4 channels More Details >>

Resolution provided for L60AD4

The maximum resolution for the user range setting does not change. More Details >>

Continuous logging

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices: 2 ms - For 64 devices: 6 ms More Details >>

Sample comments for special relays/registers

Files are stored as sample comments when GX Developer is installed. Read a comment from the project data of sample comments to a user project and copy a port... More Details >>