Set modules in a module configuration diagram with GX Works3 and configure the inter-module synchronization setting. [N

The inter-module synchronization function synchronizes the input or output timing of multiple I/O modules or intelligent

The following settings are required for the "Open Setting" for the number of connected external devices. - Protocol: "U

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the

Yes. Recommended products are listed in the technical bulletin FA-A-0078.

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hu

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications"

To display a list of registers assigned to labels, check [Find Label Definition] and [Display all items] in the [Conditi

If the parameter is set, the following number of modules can be mounted at maximum. - Q00UJ/Q00U/Q01UCPU: Up to 2 modul

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

351-360 of Total 1123

prev 36 / 113page next

Setting the MELSEC iQ-R series inter-module synchronization function

Set modules in a module configuration diagram with GX Works3 and configure the inter-module synchronization setting. [Navigation Window]-> [Parameter]-... More Details >>
- No：22492
- Release Date：2018/09/03 17:28
- Update：2018/09/20 10:01
- Category： MELSEC iQ-R Series
Operations that can be performed with the MELSEC iQ-R series inter-module synchronization function

The inter-module synchronization function synchronizes the input or output timing of multiple I/O modules or intelligent function modules. The inter-... More Details >>
- No：22495
- Release Date：2018/09/03 17:28
- Update：2018/09/20 11:16
- Category： MELSEC iQ-R Series
QCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices. - Protocol: "UDP" - Open System: "MELSOFT connecti... More Details >>
- No：22654
- Release Date：2018/09/03 17:29
- Update：2018/09/21 12:02
- Category： MELSEC-Q Series
Detecting the connection between a built-in Ethernet port QCPU and hub

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the QCPU is in connection with the hub. More Details >>
- No：22712
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Use of a commercial SD memory card in L series logging function

Yes. Recommended products are listed in the technical bulletin FA-A-0078.　 More Details >>
- No：22753
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:25
- Category： MELSEC-L Series
Connection status detection between a hub and the built-in Ethernet port of LCPU

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hub is connected. More Details >>
- No：22759
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Dragging and dropping function blocks in a structured project

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the program. More Details >>
- No：22910
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Writing LJ71C24 modules' parameters using GX Works2

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications" are written when intelligent functio... More Details >>
- No：22912
- Release Date：2018/09/03 17:30
- Category： Engineering Software
List of registers assigned to the labels set using GX Works2

To display a list of registers assigned to labels, check [Find Label Definition] and [Display all items] in the [Condition Setting] tab in the [Cross Refere... More Details >>
- No：22923
- Release Date：2018/09/03 17:30
- Update：2018/09/22 16:42
- Category： Engineering Software
The number of CC-Link modules mountable with a universal model QCPU module

If the parameter is set, the following number of modules can be mounted at maximum. - Q00UJ/Q00U/Q01UCPU: Up to 2 modules - Q02UCPU: Up to 4 modules - Uni... More Details >>
- No：22981
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:20
- Category： Network related products

351-360 of Total 1123

Inquiries

page top