CPU operation when the time setting failed

When an error occurs, the operation can be stopped or continued according to the "At Error Occurrence" setting.(The default is "Continue".) More Details >>

Writing QJ71C24N's parameters in GX Works2

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications" are written when intelligent functio... More Details >>

GX Developer's compatibility with QnUDVCPU

GX Developer does not support QnUDVCPU. Please use GX Works2 instead. More Details >>

Mixing the CC-Link IE Field Network with general LAN communication

Mixed communication with the same hub cannot be established. Establish the CC-Link IE Field Network and general LAN communication separately. More Details >>

Cables for CC-Link networks

Use CC-Link dedicated cables. General-purpose cables cannot be used. More Details >>

Duplication error in a CC-Link master station

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at power on. More Details >>

Deceleration stop

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time within the range of 1 to the deceleration ... More Details >>

Minor error 197AH

Minor error 197AH (Home position return zero not passed) occurs in the following case:"[St.1066] zero pass" is OFF when the re-movement to the home position ... More Details >>

Acceleration/deceleration time change

No, the time cannot be changed during operation. (Note): The following is the modules that support the acceleration/deceleration change function. • Q17nDSCP... More Details >>

Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program/Motion program Speed change requ... More Details >>