Difference in specifications between "AJ65SBTB1" and "AJ65SBTB2" in CC-Link remote I/O modules' model names

The CC-Link remote I/O modules' model names represents as follows:- AJ65SBTB1 - S: Compact type - B1: 1-wire terminal block, 1-common type- AJ65SBTB2 - S:... More Details >>

Using send FBs/receive FBs simultaneously

If multiple send FBs/receive FBs are simultaneously executed, the FBs do not function properly.When there are multiple send FBs, do not execute two or more s... More Details >>

Opening a Structured Text program in GX Developer

Install the latest version again. Check "Structured Text (ST) Language Programming Function" and install it. More Details >>

Connection status detection between a hub and the built-in Ethernet port of LCPU

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hub is connected. More Details >>

Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>

How to control MV value

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID control tag. Set the following parame... More Details >>

Specifying steps in printing data displayed in the window in GX Works2

GX Works2 Version 1.45X or later supports a print range specifying capability.Set "Start Step" and "End Step" for "Specified Print Range" in the Print window. More Details >>

The numbers of POUs and steps of "Allocate Memory for 'Online Change'" in GX Works2

The maximum number of steps that an online change can process at a time is 512. More Details >>

Transfer setup in GX Works2

The Transfer Setup window is displayed in the Navigation window. More Details >>

Regarding understanding FX5-EIP Configuration Restrictions

One FX5-EIP can be used per system. It cannot be used with FX5-ENET/IP. More Details >>