Check the following signals. • Start accept flag (M2001 to M2032) • Positioning start complete signal (M4000+20n (n: A

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time withi

SB/SW uses 512 points of refresh devices.

The functional grounding is applied to ensure the reliability of the communication.

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for sy

Ethernet UTP cables cannot be used.

- Set the network module mounted in system A to station number 0 (multiplexed remote master station). Set the netw

To assure 32-bit data, "Network Range Assignment" of the control station must satisfy the following conditions.(1) The s

Use the plate terminal packaged with the module. The size of the plate terminal is 1.0 mm wide with a thickness of 0.8 m

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)
Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

601-610 of Total 1082

prev 61 / 109page next

Virtual servomotor

Check the following signals. • Start accept flag (M2001 to M2032) • Positioning start complete signal (M4000+20n (n: Axis No.-1)) More Details >>
- No：23552
- Release Date：2018/09/14 15:09
- Update：2023/02/08 10:39
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Deceleration stop

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time within the range of 1 to the deceleration ... More Details >>
- No：23551
- Release Date：2018/09/14 15:09
- Category： RnMTCPU
Deceleration stop

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time within the range of 1 to the deceleration ... More Details >>
- No：23550
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU
SB/SW refresh device setting with CC-Link

SB/SW uses 512 points of refresh devices. More Details >>
- No：23081
- Release Date：2018/09/03 17:31
- Category： Network related products
Grounding of CC-Link

The functional grounding is applied to ensure the reliability of the communication. More Details >>
- No：23076
- Release Date：2018/09/03 17:31
- Category： Network related products
Limitation on the number of MELSOFT products that can be connected with the QJ71E71

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for system and the connections for users 1 ... More Details >>
- No：23063
- Release Date：2018/09/03 17:31
- Category： Network related products
Using Ethernet UTP cables for the CC-Link IE Controller

Ethernet UTP cables cannot be used. More Details >>
- No：23062
- Release Date：2018/09/03 17:31
- Category： Network related products
Precaution about MELSECNET/H connection (2)

- Set the network module mounted in system A to station number 0 (multiplexed remote master station). Set the network module mounted in system B to any sta... More Details >>
- No：23054
- Release Date：2018/09/03 17:31
- Update：2018/09/26 11:00
- Category： Network related products
32-bit data assurance

To assure 32-bit data, "Network Range Assignment" of the control station must satisfy the following conditions.(1) The start device No. of LB is a multiple o... More Details >>
- No：23052
- Release Date：2018/09/03 17:31
- Category： Network related products
Applicable size for plug-in connector socket block on QJ71C24N-R4

Use the plate terminal packaged with the module. The size of the plate terminal is 1.0 mm wide with a thickness of 0.8 mm. More Details >>
- No：23043
- Release Date：2018/09/03 17:31
- Category： Network related products

601-610 of Total 1082

Inquiries

page top