Mixed communication with the same hub cannot be established. Establish the CC-Link IE Field Network and general LAN comm

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting.

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected.

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙T

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time.

Follow the steps below and then execute PLC type change.- On the menu of GX Developer, select [Online] -> [Monitor] -

The capacity of parameters and programs subtracted from the program capacity for the CPU type in use equals the size of

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

661-670 of Total 1123

prev 67 / 113page next

Mixing the CC-Link IE Field Network with general LAN communication

Mixed communication with the same hub cannot be established. Establish the CC-Link IE Field Network and general LAN communication separately. More Details >>
- No：22988
- Release Date：2018/09/03 17:31
- Update：2019/06/27 15:48
- Category： Network related products
NTP support by the SNTP function of LCPU with built-in Ethernet port

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting. More Details >>
- No：22744
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Number of FX3U-1PG pulse output blocks that can be connected to the FX3U/FX3UC main unit

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected. 　　 * To connect the FX3U-1PG to the... More Details >>
- No：24973
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Positioning Control
Starting time of the FX3U-1PG

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙The pulse number is used as the stand... More Details >>
- No：24943
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Positioning Control
Memory allocation for online change

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time. More Details >>
- No：22575
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:01
- Category： MELSEC-Q Series
PLC type change in GX Developer

Follow the steps below and then execute PLC type change.- On the menu of GX Developer, select [Online] -> [Monitor] -> [Stop Monitoring (All Windows)],... More Details >>
- No：22522
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Memory allocation for online change in GX Works2

The capacity of parameters and programs subtracted from the program capacity for the CPU type in use equals the size of the maximum number of steps. More Details >>
- No：22671
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
I/O assignment of PLC parameters with GX Works3

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "System Parameter". <Setting fr... More Details >>
- No：22475
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:42
- Category： MELSEC iQ-R Series
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

661-670 of Total 1123

Inquiries

page top