The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module C

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, fr

A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave sta

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected.

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable contr

It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual. ME

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

681-690 of Total 1110

prev 69 / 111page next

Time out error in the communication test of MX Component

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module Check the IP address, network number, sta... More Details >>
- No：22934
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:49
- Category： Engineering Software
CC-Link slave station's flashing L.ERR LED

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the communication is instable due to the ... More Details >>
- No：23001
- Release Date：2018/09/03 17:31
- Category： Network related products
Difference between networks called CC-Link and those called MELSEC

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, from a controller network to field/moti... More Details >>
- No：23013
- Release Date：2018/09/03 17:31
- Category： Network related products
What makes the ERR LED flash in a CC-Link network

A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave station: Reassess the power supply, the ... More Details >>
- No：23023
- Release Date：2018/09/03 17:31
- Category： Network related products
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Adding two channels of the RS-232C port in the FX3G series

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
- No：24926
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Main Unit
Number of FX3U-1PG pulse output blocks that can be connected to the FX3U/FX3UC main unit

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected. 　　 * To connect the FX3U-1PG to the... More Details >>
- No：24973
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Positioning Control
Transferring/editing programs in the previous FX programmable controllers using GX Works2

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable controllers. More Details >>
- No：25012
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the connection between FX5-CCLGN-MS and NZ2GN2S-60AD4

Available. More Details >>
- No：39279
- Release Date：2023/01/12 16:47
- Category： MELSEC iQ-F Series , Network/Communication
Regarding connection of SD Memory Card module: FX5-SDCD

It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual. MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC Use... More Details >>
- No：39337
- Release Date：2023/02/14 17:27
- Category： MELSEC iQ-F Series , Option , CPU Module

681-690 of Total 1110

Inquiries

page top