The bits 0 to F of the special register SD1284 (Open request signal) correspond to the connection numbers 1 to 16. When

If multiple send FBs/receive FBs are simultaneously executed, the FBs do not function properly.When there are multiple s

Yes, the time can be changed during operation by using the acceleration/deceleration time change function. Set the accel

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not

The external and mounting dimensions of the FX2N-1PG and the FX3U-1PG are identical. However, the electrical specificati

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (posi

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S

It does not. The built-in high-speed counter function of the FX5U/FX5UC CPU module does not support DC5V input. DC5V in

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

781-790 of Total 1123

prev 79 / 113page next

SD1284 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1284 (Open request signal) correspond to the connection numbers 1 to 16. When the open request is sent, the corresp... More Details >>
- No：22784
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Using send FBs/receive FBs simultaneously

If multiple send FBs/receive FBs are simultaneously executed, the FBs do not function properly.When there are multiple send FBs, do not execute two or more s... More Details >>
- No：22893
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Acceleration/deceleration time change

Yes, the time can be changed during operation by using the acceleration/deceleration time change function. Set the acceleration/deceleration time change para... More Details >>
- No：23568
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q170MSCPU
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Main Unit
Differences in the mounting dimensions and sizes between the pulse output blocks FX2N-1PG and FX3U-1PG

The external and mounting dimensions of the FX2N-1PG and the FX3U-1PG are identical. However, the electrical specifications and connectable FX programmable c... More Details >>
- No：24905
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Positioning Control
Parameter setting of FX3U-1PG

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (positioning parameter selection). Select ... More Details >>
- No：24917
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Positioning Control
Using a fixed latched (battery backed) type device as a general type device

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>
- No：24925
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Main Unit
Regarding program execution using SD Memory Cards

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S CPU module, you need to install an a... More Details >>
- No：39311
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding input of Differential Driver Output Type

It does not. The built-in high-speed counter function of the FX5U/FX5UC CPU module does not support DC5V input. DC5V input can be achieved by adding BUS con... More Details >>
- No：39350
- Release Date：2023/01/12 17:09
- Update：2025/03/07 13:25
- Category： MELSEC iQ-F Series , CPU Module , High-Speed Counter
Regarding program conversion from FX3 Series to iQ-F Series

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX Works3 Projects > Open Other Forma... More Details >>
- No：44349
- Release Date：2024/03/27 15:31
- Category： MELSEC iQ-F Series , CPU Module

781-790 of Total 1123

Inquiries

page top