Connection status detection between a hub and the built-in Ethernet port of LCPU

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hub is connected. More Details >>

Availability of step ladders for FX in L series

Step ladders are not available in LCPU. There is no alternative function. More Details >>

LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>

Boot file setting of the QnUDVCPU

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source). More Details >>

MX Component's compatibility with Windows7 Embedded

MX Component does not support Windows7 Embedded. More Details >>

USB cable type for CPU modules

It is the miniB-type. More Details >>

Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>

How to display local comments in GX Works2

In the "Reference/Reflection Target for Device Comment" window, switch the "Specify the Reference/Reflection" from "Global" to "Local". More Details >>

Life expectancy of the CompactFlash card used in the high speed data logger module

The life expectancy is determined by the following calculation.Life expectancy (year) = Total writable size (GB) / 1 year write size (GB/year)For more detail... More Details >>

MX Component Version 3's compatibility with Visual Studio 2010

MX Component Version 3.15R or later supports Visual Basic and Visual C++ of Visual Studio 2010. More Details >>