When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications betwe

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, lau

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of

Major differences are shown below. - AJ65SBTB1-32DT1 <Input specifications> - Input type positive common (sink ty

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

981-990 of Total 1123

prev 99 / 113page next

Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
CC-Link slave station's flashing L.ERR LED

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the communication is instable due to the ... More Details >>
- No：23001
- Release Date：2018/09/03 17:31
- Category： Network related products
Torque limit

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the current torque reaches the limit, "b... More Details >>
- No：23592
- Release Date：2018/09/14 15:09
- Category： QD75M
Communications with a personal computer after the communication parameters for the RS-232C communication equipment are set

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications between the personal computer and the prog... More Details >>
- No：24782
- Release Date：2019/02/27 16:10
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding configuring of Data Logging

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, launch it from GX Works3 Tools > Logg... More Details >>
- No：44613
- Release Date：2024/11/28 16:12
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
I/O structure error in the MELSEC-F

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of the numericalvalue stored in D8060 i... More Details >>
- No：22284
- Release Date：2018/08/30 13:48
- Update：2019/02/18 15:17
- Category： MELSEC-F Series , Engineering Software , Main Unit
Difference between AJ65SBTB1-32DTE1 and AJ65SBTB1-32DT1

Major differences are shown below. - AJ65SBTB1-32DT1 - Input type positive common (sink type) - Rated input current approx. 5 mA - ON voltage/ON curr... More Details >>
- No：23022
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:52
- Category： Network related products
Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
- Category： Engineering Software

981-990 of Total 1123

Inquiries

page top