Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

Check the following signals. • Start accept flag (M2001 to M2032) • Positioning start complete signal (M4000+20n (n: Axi

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

There is no setting or method to disable the login screen for the web server function.

The MQTT communication function cannot publish and subscribe at the same time. A program for the MQTT communication fun

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, M

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

1011-1020 of Total 1123

prev 102 / 113page next

Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Virtual servomotor

Check the following signals. • Start accept flag (M2001 to M2032) • Positioning start complete signal (M4000+20n (n: Axis No.-1)) More Details >>
- No：23552
- Release Date：2018/09/14 15:09
- Update：2023/02/08 10:39
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding the login screen for the Web Server Function

There is no setting or method to disable the login screen for the web server function. More Details >>
- No：44357
- Release Date：2024/03/27 15:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding simultaneous execution of the MQTT communication function

The MQTT communication function cannot publish and subscribe at the same time. A program for the MQTT communication function is created using FB, but it c... More Details >>
- No：44345
- Release Date：2024/03/27 15:25
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the specifications of the built-in Ethernet function of FX5 CPU module

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, MODBUS/TCP, socket communication, and ... More Details >>
- No：22320
- Release Date：2018/08/30 13:55
- Update：2023/07/04 15:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

1011-1020 of Total 1123

Inquiries

page top