Regarding use of the FTP Server Auto Transfer Function with Other Functions

Be careful when using the FTP server auto transfer function in combination with the following functions. ・FTP client (FTPPUT instruction) 　The function exe... More Details >>

GX Works2 installation procedure from the iQ Works disk

Use setup.exe in iQ Works Disk 2 (appears directly under the disk folder), to install the application.For the individual installation procedure from the iQ W... More Details >>

Execution of the SOCRMODE instruction in the same connection during socket communication of LCPU

It can be executed for the same connection number. When data exist in the socket communication receive data area and the SOCRMODE instruction is executed, va... More Details >>

Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>

How to obtain connectors used for L series connector type I/O modules

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2 (crimp connector, straight out type),... More Details >>

Operation performed when file registers are read

Checking "Device Memory" does not read file registers. Switch the Target Memory for "PLC Data" to "Standard RAM" and check "File Register" in the Read from P... More Details >>

Writing LJ71C24 modules' parameters using GX Works2

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications" are written when intelligent functio... More Details >>

Motor rotation direction

Change the direction with "[PA14] Rotation direction selection/travel direction selection". More Details >>

Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program Speed change request CHGV, CHGVS... More Details >>

Models of the MELSEC-F series main units

"E" represents AC power supply and "D" represents DC power supply. The alphabets following "E" and "D" represent output types. "S" represents replay output... More Details >>