If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memor

If a circuit is being monitored or a monitor window such as the device batch monitor window is open, [Transfer Setup] on

Use setup.exe in iQ Works Disk 2 (appears directly under the disk folder), to install the application.For the individual

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which spe

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ve

The MX-F Model also supports the built-in positioning function. The number of control axes is now 4, and PULSE/SIGN and

The connection cable is GT01-C30R4-8P. The FX5U CPU module does not have an RS422 port, so you will need to add an FX5-4

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

Yes, they are independent common terminals.

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

361-370 of Total 1123

prev 37 / 113page next

PLC write not possible due to memory overload

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develo... More Details >>
- No：22595
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:49
- Category： MELSEC-Q Series
Unable to select [Transfer Setup]

If a circuit is being monitored or a monitor window such as the device batch monitor window is open, [Transfer Setup] on the menu is grayed out. Select [Wi... More Details >>
- No：22548
- Release Date：2018/09/03 17:28
- Update：2018/09/20 15:40
- Category： MELSEC-Q Series
GX Works2 installation procedure from the iQ Works disk

Use setup.exe in iQ Works Disk 2 (appears directly under the disk folder), to install the application.For the individual installation procedure from the iQ W... More Details >>
- No：22516
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Regarding address change of positioning operation.

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which specifies the positioning address and t... More Details >>
- No：22298
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:53
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding the processing specification of the basic operation instruction(LD).

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ver.1.100 or above, this specification ... More Details >>
- No：22287
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding the built-in positioning function

The MX-F Model also supports the built-in positioning function. The number of control axes is now 4, and PULSE/SIGN and CW/CCW are supported. The maximum f... More Details >>
- No：44978
- Release Date：2025/05/08 09:08
- Category： MELSEC MX Controller MX-F Model
Regarding reuse of GOT connector cable when replacing with FX5 CPU module

The connection cable is GT01-C30R4-8P. The FX5U CPU module does not have an RS422 port, so you will need to add an FX5-422-BD-GOT. More Details >>
- No：44615
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , CPU Module
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Terminal layout on the output side of the FX3U-16MR/ES

Yes, they are independent common terminals. More Details >>
- No：24955
- Release Date：2019/04/18 14:23
- Category： MELSEC-F Series , Main Unit
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Network/Communication

361-370 of Total 1123

Inquiries

page top