The following Diatrend cable can be used.- DQ-U2

When an ACPU module is replaced with a QCPU module, programs for the ACPU module can be used by changing the PLC type in

Any data can be sent and received if the socket communication function instructions are used.

For "U**", set the first two digits of the start I/O number of an intelligent function module in three-digit representat

Mitsubishi Electric's SD memory cards, which can be installed into Q24DHCCPU-V, are shown below. - NZ1MEM-2GBSD (memory

The error does not affect the CPU time. The CPU time is not set when a communication error occurs.

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destina

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L s

The minimum input response times are different. The minimum input response time is 100 microseconds for standard inputs,

The input method for statements, either "PLC" or "Peripheral", makes a difference. - If "PLC" is set for statements, t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

401-410 of Total 1110

prev 41 / 111page next

Cables for CPU modules

The following Diatrend cable can be used.- DQ-U2 More Details >>
- No：22623
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Compatibility between the A series modules and Q series modules

When an ACPU module is replaced with a QCPU module, programs for the ACPU module can be used by changing the PLC type in GX Developer. However, the programs ... More Details >>
- No：22696
- Release Date：2018/09/03 17:29
- Update：2018/09/21 14:21
- Category： MELSEC-Q Series
Data communications between programmable controllers

Any data can be sent and received if the socket communication function instructions are used. More Details >>
- No：22702
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to specify intelligent function module devices

For "U**", set the first two digits of the start I/O number of an intelligent function module in three-digit representation.Example) For X/Y1F0, set "U1F". More Details >>
- No：22704
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
SD memory cards used for Q24DHCCPU-V

Mitsubishi Electric's SD memory cards, which can be installed into Q24DHCCPU-V, are shown below. - NZ1MEM-2GBSD (memory capacity: 2Gbytes) - NZ1MEM-4GBSD (... More Details >>
- No：22711
- Release Date：2018/09/03 17:29
- Update：2018/09/22 08:58
- Category： MELSEC-Q Series
SNTP communication error in built-in Ethernet port LCPU

The error does not affect the CPU time. The CPU time is not set when a communication error occurs. More Details >>
- No：22783
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>
- No：22785
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Causes to why SD1286 does not turn on during socket communication of LCPU

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L series CPU. - In the TCP fixed-length... More Details >>
- No：22787
- Release Date：2018/09/03 17:30
- Update：2018/09/22 11:51
- Category： MELSEC-L Series
Difference between standard inputs A06 to B11 and high-speed inputs A12 to B20 of LCPU built-in I/O function

The minimum input response times are different. The minimum input response time is 100 microseconds for standard inputs, and 10 microseconds for high-speed i... More Details >>
- No：22804
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Statements of GX Works2 and the scan time

The input method for statements, either "PLC" or "Peripheral", makes a difference. - If "PLC" is set for statements, they are written into the program mem... More Details >>
- No：22856
- Release Date：2018/09/03 17:30
- Update：2018/09/22 14:18
- Category： Engineering Software

401-410 of Total 1110

Inquiries

page top