Make a space for comments in the parameter setting of the programmable controller with GX Developer.To write the created

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEac

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2).

Whether the terminal block is removable or not differs depending on the series. Types of the terminal blocks for the MEL

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligen

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by ins

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-

The output contact is activated according to the change of the current value register along with the counting input. The

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(26)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(26)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

641-650 of Total 1108

prev 65 / 111page next

Writing comments into a programmable controller

Make a space for comments in the parameter setting of the programmable controller with GX Developer.To write the created comments into a programmable control... More Details >>
- No：22962
- Release Date：2018/09/03 17:31
- Category： Engineering Software
MODE switch setting for QJ61BT11N

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEach mode in ascending order of set valu... More Details >>
- No：23025
- Release Date：2018/09/03 17:31
- Category： Network related products
Connecting QJ71C24N to an external device that has no DTR signal

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2). More Details >>
- No：23039
- Release Date：2018/09/03 17:31
- Category： Network related products
Terminal blocks for the MELSEC-F series

Whether the terminal block is removable or not differs depending on the series. Types of the terminal blocks for the MELSEC-F series main units are as follow... More Details >>
- No：24774
- Release Date：2019/02/27 15:34
- Category： MELSEC-F Series , Main Unit
Connecting local stations to the FX3U-16CCL-M

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligent device stations can be connected to... More Details >>
- No：24791
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Network/Communication
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Latched (battery backed) area in the data register (D) of the FX3G/FX3GC series

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by installing an optional battery and setti... More Details >>
- No：24901
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Main Unit
Differences in the specifications between the programmable controllers used in Japan and overseas.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
- No：24913
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Adding two channels of the RS-232C port in the FX3G series

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
- No：24926
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Main Unit
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43
- Category： MELSEC-F Series , Main Unit

641-650 of Total 1108

Inquiries

page top