In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The

Set the number of occupied stations for a CC-Link local station using the programming tool, GX Developer or GX Works2. S

Identify disconnected stations using either of the following methods. (1) Select [Diagnostics] -> [CC-Link Diagnosti

The operation is not guaranteed. Please select the extension blocks and units from FX2N series.

FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector convers

SD Memory Card module: You will need an FX5-SDCD and an SD memory card.

Parallel linking between FX5 and FX3 CPU modules is not available. The N:N Network function supports communication betwe

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versio

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

651-660 of Total 1123

prev 66 / 113page next

Setting a high-speed timer and a low-speed timer

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The message indicating that "There is a d... More Details >>
- No：22943
- Release Date：2018/09/03 17:30
- Category： Engineering Software
How to set the numbers of occupied stations for CC-Link local stations

Set the number of occupied stations for a CC-Link local station using the programming tool, GX Developer or GX Works2. Set the number for "Number of Occupied... More Details >>
- No：22980
- Release Date：2018/09/03 17:31
- Category： Network related products
Identifying disconnected CC-Link stations

Identify disconnected stations using either of the following methods. (1) Select [Diagnostics] -> [CC-Link Diagnostics].from the menu in GX Works2 or G... More Details >>
- No：23053
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:59
- Category： Network related products
Extension blocks and units that can be used in the FX3U series

The operation is not guaranteed. Please select the extension blocks and units from FX2N series. More Details >>
- No：24935
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , I/O Extension
Programmable controller series which the FX3U-1PG pulse output block can be added to

FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector conversion adapter or the FX3UC-1PS-5V exte... More Details >>
- No：24947
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series , Positioning Control
Regarding using the FX5S CPU module Data Logging Function

SD Memory Card module: You will need an FX5-SDCD and an SD memory card. More Details >>
- No：39333
- Release Date：2023/02/14 09:09
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding the parallel link function between CPU modules

Parallel linking between FX5 and FX3 CPU modules is not available. The N:N Network function supports communication between the FX5 CPU module and the FX3 CPU... More Details >>
- No：39364
- Release Date：2023/02/15 13:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding the built-in motion function

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the iQ-F series is programmed using buff... More Details >>
- No：44970
- Release Date：2025/06/18 14:38
- Category： MELSEC MX Controller MX-F Model

651-660 of Total 1123

Inquiries

page top