It is available as a repair part. Please consult with local Mitsubishi Electric representative.

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two perso

Yes, it is possible. Write a new value to the operation speed change value (BFM#56, #55) during the positioning operatio

The station number setting is not required for non-protocol communication.

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.0

PLC :it is written to the CPU module and consumes the number of steps. ・Without character - 3 steps ・With character : 4

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

731-740 of Total 1123

prev 74 / 113page next

Cable provided with the FX2N series extension unit

It is available as a repair part. Please consult with localMitsubishi Electric representative. More Details >>
- No：24916
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit , I/O Extension
Maximum number of personal computers that can be communicated with the FX3U-ENET-L simultaneously

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two personal computers can be used. In additi... More Details >>
- No：24920
- Release Date：2019/04/17 11:41
- Category： MELSEC-F Series , Network/Communication
Operation speed change during a positioning operation of the FX3U-1PG

Yes, it is possible. Write a new value to the operation speed change value (BFM#56, #55) during the positioning operation. * After the operation speed chang... More Details >>
- No：24927
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Positioning Control
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Types of the ports built in the FX programmable controllers

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX3GC series. More Details >>
- No：24971
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Main Unit
Target address change during the positioning operation in the FX3U-1PG

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the positioning operation. 　　 * The targ... More Details >>
- No：24986
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Positioning Control
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
- Category： MELSEC-F Series , Engineering Software , Main Unit
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Regarding clearing the maximum and minimum scan times

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.085 P or later or by special relays. More Details >>
- No：39342
- Release Date：2023/02/15 10:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding Statement and Note Types

PLC :it is written to the CPU module and consumes the number of steps. ・Without character - 3 steps ・With character : 4 + (Number of characters + 2 + 14) /... More Details >>
- No：40023
- Release Date：2023/08/24 15:39
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

731-740 of Total 1123

Inquiries

page top