Station number settings for MELSECNET/H networks

A station number can be skipped by setting the station as a reserved station. More Details >>

Receiving data when no receive complete code is designated (QJ71C24N)

Data are received on a received data count basis. If there is no receive complete code and variable length data is received, the data is received at every no... More Details >>

Difference between networks called CC-Link and those called MELSEC

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, from a controller network to field/moti... More Details >>

Difference between CC-Link reserved stations and invalid stations

- Reserved station Reserved stations are not actually connected to the network (but will be connected in the future) but do not appear as data link error... More Details >>

Difference in specifications between "AJ65BT" and "AJ65SBT" in CC-Link remote I/O modules' model names

"[ ]" in the CC-Link remote I/O modules' model name "AJ65[ ]BT" represents as follows: - None: Standard type - S: Compact type - F: Low profile waterpro... More Details >>

Creating function blocks

The number of FB definitions created in a project has no limitation. More Details >>

Function blocks of GX Developer and GX Works2

The same function blocks can be created and used. More Details >>

Opening SFC programs in GX Works2

To open a GX Developer project, select [Project] -> [Open Other Data] -> [Open Other Project] from the menu of GX Works2. More Details >>

Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>

Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>