The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

Since they are octal, the number after X7 is X10 and after X77 is X100.

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register.

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2

You cannot select the item while the programmable controller is being monitored. Execute [Close all windows] of [Window]

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot

The CC-Link IE Control Network is a high-capacity controller network whose maximum number of link points is 128k words.

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time withi

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

851-860 of Total 1123

prev 86 / 113page next

Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
- Category： MELSEC-F Series , Main Unit , Network/Communication
Input numbers of the FX programmable controllers

Since they are octal, the number after X7 is X10 and after X77 is X100. More Details >>
- No：25000
- Release Date：2019/04/23 10:39
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding program execution using SD Memory Cards

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S CPU module, you need to install an a... More Details >>
- No：39311
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding registering profiles

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register. More Details >>
- No：44360
- Release Date：2024/03/27 16:01
- Category： MELSEC iQ-F Series , Engineering Software
How to obtain connectors used for L series connector type I/O modules

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2 (crimp connector, straight out type),... More Details >>
- No：22791
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
I cannot select [Transfer Setup] in GX Developer because it is displayed in gray.

You cannot select the item while the programmable controller is being monitored. Execute [Close all windows] of [Window] from the tool bar, and check if Tra... More Details >>
- No：22955
- Release Date：2018/09/03 17:31
- Update：2018/09/25 12:11
- Category： Engineering Software
Remedies for WDT errors on a MELSECNET/H board

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot work due to a computer or OS hang, or... More Details >>
- No：22969
- Release Date：2018/09/03 17:31
- Category： Network related products
Differences between CC-Link IE Control Network and CC-Link IE Field Network

The CC-Link IE Control Network is a high-capacity controller network whose maximum number of link points is 128k words. The CC-Link IE Field Network is an al... More Details >>
- No：23085
- Release Date：2018/09/03 17:31
- Category： Network related products
Deceleration stop

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time within the range of 1 to the deceleration ... More Details >>
- No：23550
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU
Torque limit

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the current torque reaches the limit, "b... More Details >>
- No：23592
- Release Date：2018/09/14 15:09
- Category： QD75M

851-860 of Total 1123

Inquiries

page top