In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

A battery is consumed regardless of the on/off state of the programmable controller. Refer to the User's Manual (Hardwar

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

The totem pole output encoder cannot be connected to the FX2NC-1HC/ FX2N-1HC/ FX3U-2HC. The connectable encoders are as

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is

It can be used in the FX3G series main units with Ver. 1.10 or later.

No, they cannot be added together. Only one FX3U-16CCL-M can be connected to one main unit. Multiple FX2N-16CCL-Ms can b

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by ins

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

91-100 of Total 198

prev 10 / 20page next

Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit , I/O Extension
Battery consumption while the programmable controller is powered on

A battery is consumed regardless of the on/off state ofthe programmable controller. Refer to the User's Manual (Hardware Edition) for the module used, and r... More Details >>
- No：24687
- Release Date：2019/02/22 11:44
- Update：2019/02/22 15:22
- Category： MELSEC-F Series , Main Unit , Accessories
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22272
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Connection of a totem pole output encoder

The totem pole output encoder cannot be connected to the FX2NC-1HC/FX2N-1HC/ FX3U-2HC. The connectable encoders are as follows. ･ Open collector output typ... More Details >>
- No：25010
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , High-Speed Counting
Target address change during the positioning operation in the FX3U-1PG

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the positioning operation. 　　 * The targ... More Details >>
- No：24986
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Positioning Control
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit , Network/Communication
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Main Unit , Network/Communication
Using the FX3U-16CCL-M and FX2N-16CCL-M together

No, they cannot be added together. Only one FX3U-16CCL-M can be connected to one main unit. Multiple FX2N-16CCL-Ms can be connected to one main unit (dependi... More Details >>
- No：24954
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Network/Communication
Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories
Latched (battery backed) area in the data register (D) of the FX3G/FX3GC series

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by installing an optional battery and setti... More Details >>
- No：24901
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Main Unit

91-100 of Total 198

Inquiries

page top