A memory cassette has a PROTECT switch to prevent a program from being overwritten in EEPROM and flash ROM. When this s

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

Up to 2 connections can be opened.

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be ch

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

One extension cable can be used per system. Two or more extension cables cannot be used.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

101-110 of Total 198

prev 11 / 20page next

Writing a program to a memory cassette

A memory cassette has a PROTECT switch to prevent a program from being overwritten in EEPROM and flash ROM. When this switch is on, writing of the program i... More Details >>
- No：24788
- Release Date：2019/02/28 09:07
- Category： MELSEC-F Series , Accessories
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
MELSOFT connection of the FX3U-ENET-L Ethernet interface block

Up to 2 connections can be opened. More Details >>
- No：24919
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Network/Communication
Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
- Category： MELSEC-F Series , Main Unit
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Engineering Software , Main Unit
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Number of extension cables that can be used per system

One extension cable can be used per system. Two or more extension cables cannot be used. More Details >>
- No：24958
- Release Date：2019/04/18 14:33
- Category： MELSEC-F Series

101-110 of Total 198

Inquiries

page top