FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector convers

The output contact is activated according to the change of the current value register along with the counting input. The

The thickness of wire should be 2 square millimeters or more, and class D grounding (grounding resistance: 100 Ω or less

GX Works2 with Ver. 1.87R or later is required.

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

The operation is not guaranteed. Please select the extension blocks and units from FX2N series.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a pers

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum lo

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

111-120 of Total 198

prev 12 / 20page next

Programmable controller series which the FX3U-1PG pulse output block can be added to

FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector conversion adapter or the FX3UC-1PS-5V exte... More Details >>
- No：24947
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series , Positioning Control
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43
- Category： MELSEC-F Series , Main Unit
Thickness of ground wire

The thickness of wireshould be2 square millimeters or more, andclass D grounding (grounding resistance: 100 Ω or less) should be performed. More Details >>
- No：24899
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Settings for the FX3U-ENET-ADP

GX Works2 with Ver. 1.87R or later is required.　 More Details >>
- No：24781
- Release Date：2019/02/27 16:10
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Main Unit
Connection of expansion boards and a memory cassette to the FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a memory cassette can b... More Details >>
- No：24952
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit
Extension blocks and units that can be used in the FX3U series

The operation is not guaranteed. Please select the extension blocks and units from FX2N series. More Details >>
- No：24935
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , I/O Extension
Differences in the specifications between the programmable controllers used in Japan and overseas.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
- No：24913
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Remote maintenance

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a personal computer (GX Developer). With a ... More Details >>
- No：24998
- Release Date：2019/04/23 10:38
- Category： MELSEC-F Series , Main Unit
Pulse output type of the FX3U-1PG pulse output block

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum load current 20 mA or lower More Details >>
- No：24972
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Positioning Control

111-120 of Total 198

Inquiries

page top