The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable contr

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25)

A battery is consumed regardless of the on/off state of the programmable controller. Refer to the User's Manual (Hardwa

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data wil

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

131-140 of Total 198

prev 14 / 20page next

Assignment of remote input device and remote output device of FX3U-16CCL-M

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a program for updating data. For de... More Details >>
- No：24792
- Release Date：2019/02/28 09:08
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
- Category： MELSEC-F Series , Engineering Software , Main Unit
Transferring/editing programs in the previous FX programmable controllers using GX Works2

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable controllers. More Details >>
- No：25012
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
Battery replacement timing

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25). The life of the battery changes wit... More Details >>
- No：22262
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Battery consumption while the programmable controller is powered on

A battery is consumed regardless of the on/off state ofthe programmable controller. Refer to the User's Manual (Hardware Edition) for the module used, and r... More Details >>
- No：24687
- Release Date：2019/02/22 11:44
- Update：2019/02/22 15:22
- Category： MELSEC-F Series , Main Unit , Accessories
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Main Unit , High-Speed Counting
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
- Category： MELSEC-F Series , Main Unit , Accessories
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Network/Communication

131-140 of Total 198

Inquiries

page top