Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a

The longest gratis warranty term after manufacturing shall be eighteen (18) months. For details, refer to the gratis war

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25)

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

GX Works2 with Ver. 1.87R or later is required.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

141-150 of Total 198

prev 15 / 20page next

Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Assignment of remote input device and remote output device of FX3U-16CCL-M

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a program for updating data. For de... More Details >>
- No：24792
- Release Date：2019/02/28 09:08
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Gratis warranty term of the FX programmable controllers

The longest gratis warranty term after manufacturing shall be eighteen (18) months. For details, refer to the gratis warranty term explained in the applicabl... More Details >>
- No：24928
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Main Unit
Battery replacement timing

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25). The life of the battery changes wit... More Details >>
- No：22262
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit , I/O Extension
Accessories of the FX3UC-16MR/DS-T and the FX3UC-16MR/D-T

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "FX2NC-100BPCB" power supply cable for... More Details >>
- No：25005
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Main Unit , Accessories
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Engineering Software , Main Unit
Settings for the FX3U-ENET-ADP

GX Works2 with Ver. 1.87R or later is required.　 More Details >>
- No：24781
- Release Date：2019/02/27 16:10
- Category： MELSEC-F Series , Engineering Software , Network/Communication

141-150 of Total 198

Inquiries

page top