The totem pole output encoder cannot be connected to the FX2NC-1HC/ FX2N-1HC/ FX3U-2HC. The connectable encoders are as

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (posi

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

Since they are octal, the number after Y7 is Y10 and after Y77 is Y100.

For contacts to drive the coils of high-speed counters, use the contacts which are normally on during high-speed countin

No, they cannot be connected. Connect the units having the same power supply type.

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙

The thickness of wire should be 2 square millimeters or more, and class D grounding (grounding resistance: 100 Ω or less

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

141-150 of Total 198

prev 15 / 20page next

Connection of a totem pole output encoder

The totem pole output encoder cannot be connected to the FX2NC-1HC/FX2N-1HC/ FX3U-2HC. The connectable encoders are as follows. ･ Open collector output typ... More Details >>
- No：25010
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , High-Speed Counting
Parameter setting of FX3U-1PG

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (positioning parameter selection). Select ... More Details >>
- No：24917
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Positioning Control
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Main Unit
Output numbers of the FX programmable controllers

Since they are octal, the number after Y7 is Y10 and after Y77 is Y100. More Details >>
- No：24946
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series
How to use built-in high-speed counters

For contacts to drive the coils of high-speed counters, use the contacts which are normally on during high-speed counting. Do not use the input (X000 to X00... More Details >>
- No：24684
- Release Date：2019/02/22 11:38
- Update：2019/02/22 15:03
- Category： MELSEC-F Series , High-Speed Counting
Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>
- No：25008
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , Main Unit
Number of FX3U-64CCL interface blocks that can be added to a main unit

One FX3U-64CCL can be added. More Details >>
- No：24962
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Network/Communication
Starting time of the FX3U-1PG

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙The pulse number is used as the stand... More Details >>
- No：24943
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Positioning Control
Thickness of ground wire

The thickness of wireshould be2 square millimeters or more, andclass D grounding (grounding resistance: 100 Ω or less) should be performed. More Details >>
- No：24899
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Network/Communication

141-150 of Total 198

Inquiries

page top