It cannot be freely switched. It is automatically switched according to the auto detection function.

Since they are octal, the number after Y7 is Y10 and after Y77 is Y100.

For contacts to drive the coils of high-speed counters, use the contacts which are normally on during high-speed countin

To use the special blocks away from the main unit, connect them with the FX0N-30EC/FX0N-65EC extension cable and the FX2

E-mail sending function is supported, but receiving function is not available.

It is available as a repair part. Please consult with local Mitsubishi Electric representative.

Turn off the drive contact of the WR3A instruction.

Since the JOG speed is the positioning parameter, turn off and on the positioning parameter enable command (X-axis: BFM#

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

161-170 of Total 198

prev 17 / 20page next

Switching network between 10BASE-T and 100BASE-TX of the FX3U-ENET-L

It cannot be freely switched. It is automatically switched according to the auto detection function. More Details >>
- No：24964
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Network/Communication
Output numbers of the FX programmable controllers

Since they are octal, the number after Y7 is Y10 and after Y77 is Y100. More Details >>
- No：24946
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series
How to use built-in high-speed counters

For contacts to drive the coils of high-speed counters, use the contacts which are normally on during high-speed counting. Do not use the input (X000 to X00... More Details >>
- No：24684
- Release Date：2019/02/22 11:38
- Update：2019/02/22 15:03
- Category： MELSEC-F Series , High-Speed Counting
Using special blocks (extension blocks) away from a main unit

To use the special blocks away from the main unit, connect them with the FX0N-30EC/FX0N-65EC extension cable and the FX2N-CNV-BC connector conversion adapter. More Details >>
- No：24966
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Accessories
E-mail sending/receiving function of the FX3U-ENET-L

E-mail sending function is supported, but receiving function is not available. More Details >>
- No：24930
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Network/Communication
Cable provided with the FX2N series extension unit

It is available as a repair part. Please consult with localMitsubishi Electric representative. More Details >>
- No：24916
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit , I/O Extension
How to stop D/A conversion while the WR3A (Write to Dedicated Analog Block) instruction is being executed in the FX2N-2DA (analog output)

Turn off the drive contact of the WR3A instruction. More Details >>
- No：24872
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Analog Control
Changing the JOG speed in the FX3U-20SSC-H

Since the JOG speed is the positioning parameter, turn off and on the positioning parameter enable command (X-axis: BFM#519.b4, Y-axis: BFM#619.b4) to enable... More Details >>
- No：24987
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Positioning Control
Target address change during the positioning operation in the FX3U-1PG

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the positioning operation. 　　 * The targ... More Details >>
- No：24986
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Positioning Control
Connecting special adapters to the FX3G series

An FX3G-CNV-ADP is required. More Details >>
- No：24977
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Main Unit

161-170 of Total 198

Inquiries

page top