One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a

The thickness of wire should be 2 square millimeters or more, and class D grounding (grounding resistance: 100 Ω or less

Since the FX3U series does not support the FX-20P, available device ranges are within the range of the FX2N. ("R" device

To use the special blocks away from the main unit, connect them with the FX0N-30EC/FX0N-65EC extension cable and the FX2

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automaticall

Up to 2 connections can be opened.

The project file written in the write-inhibited media, such as FD, CD-R, or CD-RW, cannot be read. (Condition: The stand

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

171-180 of Total 198

prev 18 / 20page next

Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3U series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a communication special adapter and o... More Details >>
- No：24912
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Thickness of ground wire

The thickness of wireshould be2 square millimeters or more, andclass D grounding (grounding resistance: 100 Ω or less) should be performed. More Details >>
- No：24899
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Input of the R device of the FX3U series in the FX-20P

Since the FX3U series does not support the FX-20P, available device ranges are within the range of the FX2N. ("R" devices do not exist in the FX2N.) The ha... More Details >>
- No：24989
- Release Date：2019/04/23 10:37
- Category： MELSEC-F Series , Accessories
Using special blocks (extension blocks) away from a main unit

To use the special blocks away from the main unit, connect them with the FX0N-30EC/FX0N-65EC extension cable and the FX2N-CNV-BC connector conversion adapter. More Details >>
- No：24966
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Accessories
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Setting for installing a memory cassette

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automatically recognized. After the memory casset... More Details >>
- No：24974
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Main Unit
MELSOFT connection of the FX3U-ENET-L Ethernet interface block

Up to 2 connections can be opened. More Details >>
- No：24919
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Network/Communication
Storage media of a project file

The project file written in the write-inhibited media, such as FD, CD-R, or CD-RW, cannot be read. (Condition: The standard Windows status without CD-R/RW w... More Details >>
- No：25007
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Engineering Software
Connection of expansion boards and a display module to FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a display module can be... More Details >>
- No：24985
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Main Unit

171-180 of Total 198

Inquiries

page top