There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automaticall

We recommend you to connect a diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the prot

F2-40BL: Lithium thionyl chloride primary battery FX2NC-32BL: Lithium thionyl chloride primary battery FX3U-32BL: Mangan

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

11-20 of Total 198

prev 2 / 20page next

Number of FX3U-64CCL interface blocks that can be added to a main unit

One FX3U-64CCL can be added. More Details >>
- No：24962
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Network/Communication
Types of the ports built in the FX programmable controllers

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX3GC series. More Details >>
- No：24971
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Main Unit
Setting for installing a memory cassette

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automatically recognized. After the memory casset... More Details >>
- No：24974
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Main Unit
Protection components of relay contacts

We recommend you to connecta diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the protection of the relay contacts. More Details >>
- No：24999
- Release Date：2019/04/23 10:39
- Category： MELSEC-F Series , Main Unit
Types of Batteries used in MELSEC-F

F2-40BL: Lithium thionyl chloride primary battery FX2NC-32BL: Lithium thionyl chloride primary battery FX3U-32BL: Manganese dioxide lithium primary battery F... More Details >>
- No：22265
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Main Unit
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
Connection of expansion boards and a display module to FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a display module can be... More Details >>
- No：24985
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Main Unit

11-20 of Total 198

Inquiries

page top