Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications),

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be

Use the "FX-PCS-VPS/WIN" software for personal computer or the "E-20TP-SET0" handy programming panel.

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. Howev

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

The file register is used for storing predetermined values (such as specification values for product inspection). Other

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

21-30 of Total 198

prev 3 / 20page next

Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Using the FX3U-ENET-ADP and the RS-232C/RS-485 together (FX3U/FX3UC series)

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications), can be used for the FX3U/FX3UC series... More Details >>
- No：24686
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:16
- Category： MELSEC-F Series , Main Unit , Network/Communication
Turning on/off a specified bit of a word device (D) using a simple program

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be specified as "word device (D only) + ... More Details >>
- No：25011
- Release Date：2019/04/23 11:13
- Category： MELSEC-F Series , Engineering Software , Main Unit
Programming software and tool for the FX2N-10GM/FX2N-20GM

Use the "FX-PCS-VPS/WIN" software for personal computer or the "E-20TP-SET0" handy programming panel. More Details >>
- No：25014
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Accessories
Maximum number of characters in a comment that can be transferred to a FX3U series

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. However, the maximum number of characters ... More Details >>
- No：24700
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit
Special auxiliary relay which is always on (MELSEC-F)

M8000 More Details >>
- No：22258
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Differences between the file register and other registers

The file register is used for storing predetermined values (such as specification values for product inspection). Other registers are used as a temporary st... More Details >>
- No：22256
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
No communication between a programmable controller and a personal computer (GX Developer) after the communication parameters for the RS-232C communication equipment are set

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The communication setting register value ... More Details >>
- No：24876
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Engineering Software , Main Unit
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
- Category： MELSEC-F Series , Engineering Software , Main Unit

21-30 of Total 198

Inquiries

page top