Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum lo

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

One FX3U-16CCL-M can be connected to the FX3U series.

The analog input type (temperature/voltage/current) and offset/gain can be set for each channel.

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not

Yes, they have the same terminal layout.

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a pers

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

31-40 of Total 198

prev 4 / 20page next

Connection of the FX3G series and the GT1020/GT1030 series (5 V type)

Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1030 series (24 V type). More Details >>
- No：24969
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Main Unit
Pulse output type of the FX3U-1PG pulse output block

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum load current 20 mA or lower More Details >>
- No：24972
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Positioning Control
Connection of expansion boards and a display module to FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a display module can be... More Details >>
- No：24985
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Main Unit
Number of FX3U-16CCL-M CC-Link master blocks that can be connected to the FX3U series

One FX3U-16CCL-M can be connected to the FX3U series. More Details >>
- No：25009
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Network/Communication
Selection of analog inputs

The analog input type (temperature/voltage/current) and offset/gain can be set for each channel. More Details >>
- No：24902
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Analog Control
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Main Unit
Terminal layout of the FX3U-1PG and FX2N-1PG pulse output blocks

Yes, they have the same terminal layout. More Details >>
- No：24900
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Positioning Control
Using a fixed latched (battery backed) type device as a general type device

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>
- No：24925
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Main Unit
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
Remote maintenance

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a personal computer (GX Developer). With a ... More Details >>
- No：24998
- Release Date：2019/04/23 10:38
- Category： MELSEC-F Series , Main Unit

31-40 of Total 198

Inquiries

page top