Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data wil

We recommend you to connect a diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the prot

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the

A battery is consumed regardless of the on/off state of the programmable controller. Refer to the User's Manual (Hardwa

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

61-70 of Total 198

prev 7 / 20page next

Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Main Unit , High-Speed Counting
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Network/Communication
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
- Category： MELSEC-F Series , Main Unit , Accessories
Protection components of relay contacts

We recommend you to connecta diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the protection of the relay contacts. More Details >>
- No：24999
- Release Date：2019/04/23 10:39
- Category： MELSEC-F Series , Main Unit
Assignment of remote input device and remote output device of FX3U-16CCL-M

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a program for updating data. For de... More Details >>
- No：24792
- Release Date：2019/02/28 09:08
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
- Category： MELSEC-F Series , Engineering Software , Main Unit
Setting day of the week when using the TWR instruction (FX3 series)

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the setting range (K = 0 to 6), the day ... More Details >>
- No：24777
- Release Date：2019/02/27 15:57
- Category： MELSEC-F Series , Main Unit
Battery consumption while the programmable controller is powered on

A battery is consumed regardless of the on/off state ofthe programmable controller. Refer to the User's Manual (Hardware Edition) for the module used, and r... More Details >>
- No：24687
- Release Date：2019/02/22 11:44
- Update：2019/02/22 15:22
- Category： MELSEC-F Series , Main Unit , Accessories
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Network/Communication

61-70 of Total 198

Inquiries

page top