It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

An FX3G-CNV-ADP is required. * When the FX3U-ENET-ADP is used with other special adapters, connect the FX3U-ENET-ADP a

No, they cannot be added together. Only one FX3U-16CCL-M can be connected to one main unit. Multiple FX2N-16CCL-Ms can b

The FX3U-32MS/ES and FX3U-64MS/ES are triac output type.

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

We recommend you to connect a diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the prot

Check whether the lamp is back to normal after disconnecting the wiring of the "24V" (service power supply) terminal. If

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

The following models from the FX3 series support the extended register (R). FX3U/FX3UC series: R0-R32767, FX3G series: R

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

61-70 of Total 198

prev 7 / 20page next

Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories
Connection of the FX3G series and the FX3U-ENET-ADP

AnFX3G-CNV-ADP is required. 　 * When the FX3U-ENET-ADP is used with other special adapters, connect the FX3U-ENET-ADP at the last stage (left end). More Details >>
- No：24951
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit
Using the FX3U-16CCL-M and FX2N-16CCL-M together

No, they cannot be added together. Only one FX3U-16CCL-M can be connected to one main unit. Multiple FX2N-16CCL-Ms can be connected to one main unit (dependi... More Details >>
- No：24954
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Network/Communication
Triac output type main units in the FX3 series

The FX3U-32MS/ES and FX3U-64MS/ES are triac output type. More Details >>
- No：24980
- Release Date：2019/04/23 07:21
- Category： MELSEC-F Series , Main Unit
Connection of expansion boards and a display module to FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a display module can be... More Details >>
- No：24985
- Release Date：2019/04/23 07:22
- Category： MELSEC-F Series , Main Unit
Protection components of relay contacts

We recommend you to connecta diode for commutation to the DC load, and surge absorber (C-R) to the AC load for the protection of the relay contacts. More Details >>
- No：24999
- Release Date：2019/04/23 10:39
- Category： MELSEC-F Series , Main Unit
The power supply lamp of a running programmable controller suddenly turned off or flashes

Check whether the lamp is back to normalafter disconnecting the wiring of the "24V" (service power supply) terminal. Ifthe lamp is back to normal,the servic... More Details >>
- No：22267
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:53
- Category： MELSEC-F Series , Main Unit
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Main Unit
Models from the FX programmable controllers that support the extended register (R)

The following models from the FX3 series support the extended register (R). FX3U/FX3UC series: R0-R32767, FX3G series: R0-R23999 More Details >>
- No：24904
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Main Unit

61-70 of Total 198

Inquiries

page top