Since they are octal, the number after X7 is X10 and after X77 is X100.

Connectors are sold separately. There are two types of connectors: connector for flat cable and connector for bulk wire.

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer.

Check whether the lamp is back to normal after disconnecting the wiring of the "24V" (service power supply) terminal. I

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

71-80 of Total 198

prev 8 / 20page next

Input numbers of the FX programmable controllers

Since they are octal, the number after X7 is X10 and after X77 is X100. More Details >>
- No：25000
- Release Date：2019/04/23 10:39
- Category： MELSEC-F Series , Engineering Software , Main Unit
Connectors for FX3UC series

Connectors are sold separately. There are two types of connectors: connector for flat cable and connector for bulk wire. Select connectors suitable for your ... More Details >>
- No：24970
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Accessories
Connection of expansion boards and a memory cassette to the FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a memory cassette can b... More Details >>
- No：24952
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Network/Communication
1 ms timer (FX3G/3GC series)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer. More Details >>
- No：24680
- Release Date：2019/02/22 11:39
- Update：2019/02/22 14:03
- Category： MELSEC-F Series , Main Unit
The power supply lamp of a running programmable controller suddenly turned off or flashes

Check whether the lamp is back to normalafter disconnecting the wiring of the "24V" (service power supply) terminal. Ifthe lamp is back to normal,the servic... More Details >>
- No：22267
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:53
- Category： MELSEC-F Series , Main Unit
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension

71-80 of Total 198

Inquiries

page top