The "S/S" terminal is used to switch the input type (sink input and source input). For the source input, connect the "

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional bat

For issuance of a certificate, please consult your local Mitsubishi representative.

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller i

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

The FX3U-32BL can be installed to the FX3G/FX3GC series. After installation, select [Battery Mode: Use the battery] on

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

M8029 (Instruction execution complete flag) is shared with multiple instructions. To obtain an execution completion resu

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

1-10 of Total 198

prev 1 / 20page next

How to use the "S/S" terminal

The "S/S" terminal is used to switch the input type (sink input and source input). For the source input, connect the "S/S" terminal to the "0V" terminal, a... More Details >>
- No：22255
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Latch (backup) areas in the data register (D) and extended register (R) of the FX3U/FX3UC series

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on the parameter setting, refer to the... More Details >>
- No：24699
- Release Date：2019/02/27 08:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication
How to change the keeping (latched device data) range (FX3G/FX3GC)

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional battery is not used] The keeping ran... More Details >>
- No：22260
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:52
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Certificate of non-applicability to export MELSEC-F to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22264
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Necessity for installing a noise filter

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller is used in an environment with much no... More Details >>
- No：22283
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
How to install a battery to FX3G/FX3GC series

The FX3U-32BL can be installed to the FX3G/FX3GC series. After installation, select [Battery Mode: Use the battery] on the FX parameter window of GX Develop... More Details >>
- No：22271
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Network/Communication
How to use M8029

M8029 (Instruction execution complete flag) is shared with multiple instructions. To obtain an execution completion result of a specific instruction, insert... More Details >>
- No：24775
- Release Date：2019/02/27 15:34
- Category： MELSEC-F Series , Network related products , Main Unit

1-10 of Total 198

Inquiries

page top