One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be che

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. * When the

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

The output contact is activated according to the change of the current value register along with the counting input. The

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by ins

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

1-10 of Total 126

prev 1 / 13page next

Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3U series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a communication special adapter and o... More Details >>
- No：24912
- Release Date：2019/04/17 11:39
Connecting special adapters to the FX3G series

An FX3G-CNV-ADP is required. More Details >>
- No：24977
- Release Date：2019/04/23 07:20
Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Connection of the FX3GC series and FX3U-ENET-ADP

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. 　 * When the FX3U-ENET-ADP is used with other spe... More Details >>
- No：24976
- Release Date：2019/04/23 07:20
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Latched (battery backed) area in the data register (D) of the FX3G/FX3GC series

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by installing an optional battery and setti... More Details >>
- No：24901
- Release Date：2019/04/15 11:31
Adding two channels of the RS-232C port in the FX3G series

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
- No：24926
- Release Date：2019/04/17 11:42

1-10 of Total 126

Inquiries

page top