On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Cl

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, in

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. Howev

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on

The file register is used for storing predetermined values (such as specification values for product inspection). Other

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional bat

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

91-100 of Total 126

prev 10 / 13page next

Externally switching the operating status of a programmable controller

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Click the "PLC System(1)" tab, and set ... More Details >>
- No：24768
- Release Date：2019/02/27 15:01
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
Maximum number of characters in a comment that can be transferred to a FX3U series

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. However, the maximum number of characters ... More Details >>
- No：24700
- Release Date：2019/02/27 08:59
Latch (backup) areas in the data register (D) and extended register (R) of the FX3U/FX3UC series

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on the parameter setting, refer to the... More Details >>
- No：24699
- Release Date：2019/02/27 08:58
Differences between the file register and other registers

The file register is used for storing predetermined values (such as specification values for product inspection). Other registers are used as a temporary st... More Details >>
- No：22256
- Release Date：2018/08/30 13:48
How to change the keeping (latched device data) range (FX3G/FX3GC)

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional battery is not used] The keeping ran... More Details >>
- No：22260
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:52

91-100 of Total 126

Inquiries

page top