FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2.

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the

FX3U-32MR/UA1 and FX3U-64MR/UA1 are AC input types.

For the 14/24-point type FX3G series main unit, they cannot be connected together. For the 40/60-point type FX3G series

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be che

The accuracy is within ±45 seconds/month (ambient temperature: 25ºC).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

111-120 of Total 126

prev 12 / 13page next

Adding FX3U series expansion boards to an FX3UC series main unit

FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2. More Details >>
- No：24963
- Release Date：2019/04/23 07:18
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
Setting day of the week when using the TWR instruction (FX3 series)

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the setting range (K = 0 to 6), the day ... More Details >>
- No：24777
- Release Date：2019/02/27 15:57
AC input type main unit in the FX3 series

FX3U-32MR/UA1 and FX3U-64MR/UA1 are AC input types. More Details >>
- No：24991
- Release Date：2019/04/23 10:37
Connection of a memory cassette and a display module to the FX3G series main unit

For the 14/24-point type FX3G series main unit, they cannot be connected together. For the 40/60-point type FX3G series main unit, they canbe connected toget... More Details >>
- No：24978
- Release Date：2019/04/23 07:20
Types of the ports built in the FX programmable controllers

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX3GC series. More Details >>
- No：24971
- Release Date：2019/04/23 07:19
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Clock function accuracy of the MELSEC-F series

The accuracy is within ±45 seconds/month (ambient temperature: 25ºC). More Details >>
- No：24778
- Release Date：2019/02/27 15:57
Connecting special adapters to the FX3G series

An FX3G-CNV-ADP is required. More Details >>
- No：24977
- Release Date：2019/04/23 07:20

111-120 of Total 126

Inquiries

page top