Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be ch

Although it depends on the operating environment, wiring within 20 m is generally recommended.

It can be used in the FX3G series main units with Ver. 1.10 or later.

The FX3U-32MS/ES and FX3U-64MS/ES are triac output type.

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do no

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

11-20 of Total 126

prev 2 / 13page next

Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Maximum length of input wiring

Although it depends on the operating environment, wiring within 20 m is generally recommended. More Details >>
- No：24949
- Release Date：2019/04/18 14:29
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
Triac output type main units in the FX3 series

The FX3U-32MS/ES and FX3U-64MS/ES are triac output type. More Details >>
- No：24980
- Release Date：2019/04/23 07:21
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
Connection of the FX3G series and the GT1020/GT1030 series (5 V type)

Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1030 series (24 V type). More Details >>
- No：24969
- Release Date：2019/04/23 07:19
Assignment of direction signals during positioning

Any number can be assigned. More Details >>
- No：24975
- Release Date：2019/04/23 07:20

11-20 of Total 126

Inquiries

page top