The FX3S,FX3G/FX3GC series has a built-in USB port.

No, they cannot be connected. Connect the units having the same power supply type.

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications betwe

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2.

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

21-30 of Total 126

prev 3 / 13page next

FX series with a built-in USB port

The FX3S,FX3G/FX3GC series hasa built-in USB port. More Details >>
- No：24937
- Release Date：2019/04/18 14:24
- Update：2023/01/31 11:59
Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>
- No：25008
- Release Date：2019/04/23 11:12
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
Communications with a personal computer after the communication parameters for the RS-232C communication equipment are set

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications between the personal computer and the prog... More Details >>
- No：24782
- Release Date：2019/02/27 16:10
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
Adding FX3U series expansion boards to an FX3UC series main unit

FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2. More Details >>
- No：24963
- Release Date：2019/04/23 07:18
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Connection of expansion boards and a display module to FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a display module can be... More Details >>
- No：24985
- Release Date：2019/04/23 07:22
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37

21-30 of Total 126

Inquiries

page top