1. Data backup using an optional battery Built-in RAM data and clock data of a programmable controller are held by usi

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. Howev

For issuance of a certificate, please consult your local Mitsubishi representative.

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

The file register is used for storing predetermined values (such as specification values for product inspection). Other

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

21-30 of Total 126

prev 3 / 13page next

Types of data backup methods (FX3G series)

1. Data backup using an optional battery 　Built-in RAM data and clock data of a programmable controller are held by using an optional battery. 　The life of... More Details >>
- No：24701
- Release Date：2019/02/27 08:59
Maximum number of characters in a comment that can be transferred to a FX3U series

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. However, the maximum number of characters ... More Details >>
- No：24700
- Release Date：2019/02/27 08:59
Certificate of non-applicability to export MELSEC-F to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22264
- Release Date：2018/08/30 13:48
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
Differences between the file register and other registers

The file register is used for storing predetermined values (such as specification values for product inspection). Other registers are used as a temporary st... More Details >>
- No：22256
- Release Date：2018/08/30 13:48
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
I/O structure error in the MELSEC-F

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of the numericalvalue stored in D8060 i... More Details >>
- No：22284
- Release Date：2018/08/30 13:48
- Update：2019/02/18 15:17

21-30 of Total 126

Inquiries

page top