The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC powe

The operation is not guaranteed. Please select the extension blocks and units from FX2N series.

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

The following models from the FX3 series support the extended register (R). FX3U/FX3UC series: R0-R32767, FX3G series: R

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

A battery is not required when a memory cassette is used. This is because the sequence programs stored in the memory cas

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

41-50 of Total 126

prev 5 / 13page next

Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
24+ terminal connection of an extension block

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC power supply type, connect the 24+ termi... More Details >>
- No：24786
- Release Date：2019/02/28 09:06
Extension blocks and units that can be used in the FX3U series

The operation is not guaranteed. Please select the extension blocks and units from FX2N series. More Details >>
- No：24935
- Release Date：2019/04/18 14:24
Setting day of the week when using the TWR instruction (FX3 series)

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the setting range (K = 0 to 6), the day ... More Details >>
- No：24777
- Release Date：2019/02/27 15:57
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
Assignment of direction signals during positioning

Any number can be assigned. More Details >>
- No：24975
- Release Date：2019/04/23 07:20
Models from the FX programmable controllers that support the extended register (R)

The following models from the FX3 series support the extended register (R). FX3U/FX3UC series: R0-R32767, FX3G series: R0-R23999 More Details >>
- No：24904
- Release Date：2019/04/15 11:31
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
Necessity of a battery when a memory cassette is used

A battery is not required when a memory cassette is used. This is because the sequence programsstored in the memory cassette, exceptfor RAM memory cassette, ... More Details >>
- No：24770
- Release Date：2019/02/27 15:00

41-50 of Total 126

Inquiries

page top