For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be che

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3UC series. *The FX3U-ENET-ADP is

It can be used in the FX3G series main units with Ver. 1.10 or later.

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer.

The output contact is activated according to the change of the current value register along with the counting input. The

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

41-50 of Total 126

prev 5 / 13page next

Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3UC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3UC series. *The FX3U-ENET-ADP is a communication special adapter and ... More Details >>
- No：24932
- Release Date：2019/04/23 07:21
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
Types of the ports built in the FX programmable controllers

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX3GC series. More Details >>
- No：24971
- Release Date：2019/04/23 07:19
1 ms timer (FX3G/3GC series)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer. More Details >>
- No：24680
- Release Date：2019/02/22 11:39
- Update：2019/02/22 14:03
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48

41-50 of Total 126

Inquiries

page top