When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications betwe

A battery is consumed regardless of the on/off state of the programmable controller. Refer to the User's Manual (Hardwar

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data will

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25)

D8030 for VR1, and D8031 for VR2.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

41-50 of Total 126

prev 5 / 13page next

Communications with a personal computer after the communication parameters for the RS-232C communication equipment are set

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications between the personal computer and the prog... More Details >>
- No：24782
- Release Date：2019/02/27 16:10
Battery consumption while the programmable controller is powered on

A battery is consumed regardless of the on/off state ofthe programmable controller. Refer to the User's Manual (Hardware Edition) for the module used, and r... More Details >>
- No：24687
- Release Date：2019/02/22 11:44
- Update：2019/02/22 15:22
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
Model name of a built-in battery (FX3U/FX3UC)

FX3U-32BL More Details >>
- No：22278
- Release Date：2018/08/30 13:48
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
No communication between a programmable controller and a personal computer (GX Developer) after the communication parameters for the RS-232C communication equipment are set

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The communication setting register value ... More Details >>
- No：24876
- Release Date：2019/04/15 08:07
Battery replacement timing

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25). The life of the battery changes wit... More Details >>
- No：22262
- Release Date：2018/08/30 13:48
Built-in variable analog potentiometers of the FX3G series

D8030 for VR1, and D8031 for VR2. More Details >>
- No：24769
- Release Date：2019/02/27 15:01

41-50 of Total 126

Inquiries

page top