Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP i

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

Check whether the lamp is back to normal after disconnecting the wiring of the "24V" (service power supply) terminal. I

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer.

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

51-60 of Total 126

prev 6 / 13page next

Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
Using a fixed latched (battery backed) type device as a general type device

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>
- No：24925
- Release Date：2019/04/17 11:42
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
How to change the keeping (latched device data) range (FX3G/FX3GC)

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional battery is not used] The keeping ran... More Details >>
- No：22260
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:52
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
The power supply lamp of a running programmable controller suddenly turned off or flashes

Check whether the lamp is back to normalafter disconnecting the wiring of the "24V" (service power supply) terminal. Ifthe lamp is back to normal,the servic... More Details >>
- No：22267
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:53
1 ms timer (FX3G/3GC series)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer. More Details >>
- No：24680
- Release Date：2019/02/22 11:39
- Update：2019/02/22 14:03
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32

51-60 of Total 126

Inquiries

page top