Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be che

The station number setting is not required for non-protocol communication.

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input,

Connect the "0V (-)" terminal of the external 24V DC power supply to the "COM" terminal (- side of the built-in power su

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. Howeve

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications),

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data will

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please ref

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

61-70 of Total 126

prev 7 / 13page next

Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
Multiple input COM terminals

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input, the extension unit must be connected ... More Details >>
- No：22274
- Release Date：2018/08/30 13:48
How to wire the 24V DC power supply for sensors

Connect the "0V (-)" terminal of the external 24V DC power supply to the "COM" terminal (- side of the built-in power supply), one of the input terminals of ... More Details >>
- No：22281
- Release Date：2018/08/30 13:48
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
Repair term for the FX programmable controllers after discontinuation of production

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. However, some products cannot be repaired d... More Details >>
- No：24996
- Release Date：2019/04/23 10:41
Using the FX3U-ENET-ADP and the RS-232C/RS-485 together (FX3U/FX3UC series)

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications), can be used for the FX3U/FX3UC series... More Details >>
- No：24686
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:16
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
How to set battery-less operation(FX3U/FX3UC)

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please refer to the following manual for furt... More Details >>
- No：22277
- Release Date：2018/08/30 13:48
- Update：2019/02/19 08:47

61-70 of Total 126

Inquiries

page top